Plumbers In Bangor Maine

plumbers BangorWhen the faucet is leaking or the water is spraying or the toilet is overflowing, you need a plumber! Don’t despair – we have a collection of the best plumbers in the greater Bangor Maine area. With the harsh weather we experience in the Pine Tree State, Maine plumbers face a variety of issues to keep the water flowing. But some of the best in the business work in and around Bangor, and are ready to serve you. Just check out the businesses below, and get back to being dry again.

Emergency Plumbing In Bangor

Plumbing emergencies rarely happen at a convenient time. In a city like Bangor winter temperatures frequently dip way below zero degrees, with the coldest times usually occurring in the middle of the night. If the Maine cold strikes your plumbing or heating system after normal business hours, you need a plumber that will answer the phone no matter what time of day or night it is. And Bangor residents are fortunate to have a number of savvy 24-hour plumbers that will help them in their hour of need.

Bangor Plumbing Experts

If plumbing is something that you find difficult or intimidating, you are not alone. Many people can’t solve their own plumbing problems, which means that expert plumbers can charge a lot of money for even simple and quick repairs. Don’t let this happen to you, read on to learn how to solve your own plumbing problems!

Find a plumber that you can trust. Make sure to get referrals from friends and family so that you can prevent getting ripped off, which happens often. Also make sure not to pay the plumber before the work is completed. If you do that, there will not be an incentive to get the job completed in a timely manner.

Rigid copper is used for main water lines in many homes. You cannot bend rigid copper, so joints and tees must be soldered on. When soldering, always apply flux (also called soldering paste) to both surfaces. Flux retards oxidation when the copper is heated. Always use lead-free or nearly lead-free solder when sweating a copper joint.

Act quickly if your pipes freeze! Shut off the water and open the faucet, enabling it to drain when it thaws. Starting with the faucet, and working your way to the iced-up area, aim a propane torch or hairdryer at the pipe – this will quickly defrost it. You could also wrap the pipe in a heating pad or aim a heat lamp at it, but this will take quite some time. A last resort is to wrap the pipe in rags and pour boiling water over it.

Ensure that everyone in your household knows how to turn off the main water supply, or knows how to contact someone who can. In the event of a burst pipe or other water-related emergency, you should immediately turn off the water to prevent flooding, structural damage, and a sky-high water bill.

If you have a clogged toilet with the water level very low, and plunging it isn’t working, it’s possible to resolve this by pouring warm water from a bucket directly into the toilet bowl from about waist level. Repeat this as many times as necessary until your clog is gone, and you can flush normally once again.

Do not overload your garbage disposal. If you need to dispose of large items, cut them up into smaller pieces. Also, do not put too much in at a time, put one or two items in and wait a few seconds to dispose of the rest. Overloading your disposal can cause the engine to overheat.

In order to keep your garbage disposal in optimal working condition, run it on a regular basis. Just a simple 60 seconds per day under cold water can keep it running clean and smooth. If not run regularly, your disposal can be susceptible to corrosion that will eventually make it inoperable.

Before you can fix a toilet that does not flush properly, it is important that you find out what is causing the problem. Depending on what the problem is, you may be able to fix it yourself. However, more complicated toilet flushing problems may require the services of a plumber.

Every now and then, you should pour a large bucket of water down your basement floor drain. This will help to keep the trap seal full and prevent certain gases from coming up into your home. Also, be sure that you have your floor drain checked by a professional every few years.

If you find that your pipes have frozen during the cold winter months open all the faucets in your home. This lowers the water pressure for when the pipes thaw and the water is freely flowing again. Make sure to open all the faucets not just those that are frequently used.

Heat up frozen pipes carefully if they have frozen. In colder regions, pipes placed closest to outer walls and ceilings could freeze if not properly insulated. Use hot rags, hot water, a blow dryer or similar heat source. Start heating at a place nearest the tap, then work backwards.

Plumbing is not limited to water. Many skills are needed to be a plumber with expertise. One of the common and important things plumbers deal with is repairing water lines.

Make sure any plumber that you hire can handle the type of job you have. There are many aspects to plumbing and many contractors can do almost all of them, but some are better suited to doing work involved in specific areas. If need a plumber for your septic system, get one that specializes in septic systems.

Be sure to have a running toilet fixed as soon as you can. Having a running toilet uses more water, which raises your water bill. To fix it yourself, you just have to find out what the problem is and buy the supplies you need. If you can’t fix it yourself, call a plumber.

You may want to consider tankless water heaters if you want to conserve water in your home. These kind of water heaters heat up your water as soon as it is being used, so you are not wasting energy on keeping your water hot when it is not being used.

If you ever put food down the garbage disposer after a meal, make sure that you run cold water for about 15 seconds to help drain the excess debris. This will help in flushing out the excess particles down your drain, which otherwise, can build up and cause a clog, eventually.

To conserve hot water each day, run your dishwasher late at night. This will help to maintain an adequate water level for your guests and for your chores in the morning or afternoon. Also, you can increase the supply of water available to you for cooking meals throughout the day.

As you can see, many plumbing problems are very easy to solve on your own if you have the proper knowledge. Don’t let a professional plumbing service charge you a hand full for something that you can do on your own! Try the tips in this article next time and see the money you save!

DIY Faucet Repair

A leaky faucet is a hassle that could turn into a full-blown issue or even addressed correctly whether the cause of water pooling under your sink it, or the irritating dripping sound that keeps you up during the night. Luckily, putting a stop to your leaky faucet, like the compression faucet in your kitchen, can be surprisingly affordable and straightforward.

Turn off the water

Do not make a wreck worse by transforming your broken faucet . Before applying any wrench or screwdriver to your own fixture, ensure that your water supply is turned off, from the handles on the sink to the knobs underneath that control the water coming in from the principal line.

Remove Decorative Fixture Parts

A simple prying with a flat-head screwdriver will care for this. Unscrew, then gently take away the handle with your flathead. Using penetrating oil can assist in loosening it, allowing you to choose the faucet handle off the shank.

Remove The Handle

Use your wrench to loosen the packing nut. From there you should notice the stem. Remove that as well. Based on the faucet, some stems pop right away, while others twist off from the valve. Assess for just about any damage in the removed components.

Replace The Washer

If everything is intact only at that point, inspect washer and the O ring inside the valve seat–the could function as the basis for your flow. Take away the washer and put a replacement within the seat.

It is vital to be sure your replacement washers and O rings are an exact fit. If you are unsure about either, check the seat to determine whether the sides fit a cone-shaped or flat washer, and choose the appropriate type. You might want to take the old O ring to your own local hardware store to confirm the right size. You can even buy a package including numerous sizes of O-rings–occasionally it is worth the extra few bucks.

Reassemble The Pieces

From here, carefully reassemble all the parts (in order of washer/O ring, shank, packing nut, screw, and handle). Slowly and lightly turn the knob to try the running water and check to see whether you have licked that leak.

If, after all of your effort, you notice the faucet is still dripping, then the cause might be corrosion. If not cleaned as time passes, it can produce leaks near the spout. Other potential difficulties are worn out seals, loose components, or worse, broken pipes. If your troubleshooting leads to these places, or if other surprising complications occur, then it can be time for you to call one of the professional plumbers in Bangor.

Video About Plumbers in Bangor Maine

Here is a YouTube video highlighting plumbing services in Bangor:

Leave a Reply

Your email address will not be published. Required fields are marked *